High Quality Brass Fittings product descriptions:
1.Selling the brass double wire connector pipe directly fitting is the joint of the shell and even the release coil is made from brass.So these types of joint has good fire resistant type Heat resistance and splash proof performance.Mould with hot water or hot air connector can be used for hot oil.According to the thread sizes moulds,using a wrench the threaded part of embedded in mold and then directly into the joint parts,use the built-in type shutoff valve,the liquid will not overflow when install or remove combining parts.2.The cheapest price, strength, high hardness and low plasticity can be dezincification corrosion test, in a vicious environment with than normal fitting of a longer life expectancy, and less likely to leak.
3.H75 ordinary brass
4.There are quite a good mechanical properties, process performance and corrosion resistance. Well under hot and cold pressure processing. On the performance and economic in between H80, H70. Used for low load corrosion spring.
5.H70 ordinary brass
6.Have a very good plastic (is solidifying in brass) and higher strength, machinability is good, easy to welding, for the average corrosion of bearing stability, but easy to produce craze. For complex cold stamping and deep drawing parts, such as radiator shell, shell pipe, corrugated pipe, and gasket.
7.H68 ordinary brass
Have a very good plastic (is solidifying in brass) and higher strength, machinability is good, easy to welding, for the average corrosion of bearing stability, but easy to produce craze. Is one of the most widely used in ordinary brass. For complex cold stamping and deep drawing parts, such as radiator shell, tubes, bellows, shells, gaskets, etc.
8.H65 ordinary brass
Performance between H68 and H62, price H68 cheap, also have higher strength and plasticity, can well under cold and hot pressure processing, are prone to corrosion cracking. For hardware, daily necessities, small springs, screws, rivets and machine parts.
More services we offer:
Besides of Metal Stamping components,Factory Customized Brass Fittings, we also complete solution for OEM/ODM products & components, offer services of deep drawing services, EMI metal shielding parts, heat sink ,plastic molding products for custom, plastic injection components, Metal Stamping Parts, home appliances accessories ,R/C drone and smart electronic toys etc.
Our advanced equipments, professional engineers ,high quality system, enable us to provide high quality with low production cost Based on our strength, passion and capacity, we devote to supply one-stop service to customers.
Timeplex Industrial Limited
Timeplex group is a Hong Kong based organization with integrated manufacturing facilities in China. Established in 1989, Timeplex brought the Hong Kong management system to meet international standard, along side with years of proven technique and experience.
Timeplex provides customer with complete development capabilities starting from product concept, prototypes to feasibility samples and volume manufacture. Product range including metallic, plastic, electrical and electronics. Our engineering team help clients to develop the product to meet stringent specifications and to compile with the necessary mandatory standards.
Through the effort in the past two decades, Timeplex has become one of the operations who can continuously stand behind its high quality, innovation, affordable pricing and flexible lead time that clients need to remain competitive in the market.
MAIN PRODUCT LINE :
Metallic components may be designed from various materials, steel, copper, brass, aluminium, tin and lead alloys in sheets,heatsink,EMI/RFI shielding metal case, rolls, rods or ingots
Components in different sizes and configurations may be produced by stamping, forming. extrusion, forging, die-casting and secondary operation such as punching, deep drawing, drilling, threading, and riveting.
For outside appearance and environmental protection, components usually require surface finishing in electro-plating (chrome, nickel, copper, silver or gold), anodizing or powder coating.
In some cases when it is difficult to use metal stamping components to achieve the required configuration, such as piping, curvature or threading, plastic injection parts is a better option. Development of plastic products or part starts from an injection mold. Choice of plastic resins will be the first consideration our engineers will suggest to the client. From the most suitable material such as ABS, PS, PE, PP, PVC, PC etc, and based on customer target production rate and the investment budget, the mold design will be determined and fabrication will start.
Components and parts coming out of the injection molding machine will be relatively uniform. Many of them could replace more than one metallic part or even become a finished product by itself.
Major customers Include : Sky TV. Walmart, Osram, Hasbro, Intermec, PPG, Fender, Q.A. Smith, Delta, Vtouch, East West, B.A.G., Electrolux
Production Equipments :
Power Press (16 ton to 200 ton) 50Injection Molding Machines 22
Auto Grooving Machines 5
Silk-screening & Pad Printing Line 1
Assembly Line 3
- Company Name: Timeplex Industrial Limited
- Representative: Li Hong Gao
- Product/Service: Metal stamping , Metal stamping components , Metal stamping parts , Plastic injection components , Heatsink , plastic parts
- Capital (Million US $): 5,000,000
- Year Established: 1989
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
- No. of Production Lines: above 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 21 -30 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: No.6 Fukang Road,Shang Sha Community,Chang An Town,Dongguan City,Guangdong Province ,China
- Contact Person: Mr. Alan Nong
- Tel: 86-769-38809668
Premium Related Products