Black divisible HDPE micro duct connector gas connector fittings
Product Description
Divisible duct sealing sets for subducts have been developed to provide and effective and simple solution to all Gas and Watertight duct sealing requirements.
This modular system enables you to install it easily onto to new and existing installations. Due to the compact design the seals can be installed in all situations, even in locations with difficult access.
For use on subducts of 10, 12, 14, 16, 18 and 20mm.
Material specification
Plastic scales | glassfibre reinforced |
Cutting block | glassfibre reinforced |
Sealing plug | TPE |
Sealing | up to 0,5 bar |
Product overview
Description | Duct outside diameter (mm) | Cable Diameter (mm) |
Duct seal 10mm / 3.5 > 2.5mm | 10 | 3.5-2.5 |
Duct seal 10mm / 5.0 > 3.5mm | 10 | 5.0-3.5 |
Duct seal 10mm / 6.5 > 5.0mm | 10 | 6.5-5.0 |
Duct seal 10mm / 8.0 > 6.5mm | 10 | 8.0-6.5 |
Duct seal 12mm / 3.5 > 2.5mm | 12 | 3.5-2.5 |
Duct seal 12mm / 5.0 > 3.5mm | 12 | 5.0-3.5 |
Duct seal 12mm / 6.5 > 5.0mm | 12 | 6.5-5.0 |
Duct seal 12mm / 8.0 > 6.5mm | 12 | 8.0-6.5 |
Duct seal 14mm / 6.5 > 5.0 mm | 14 | 6.5-5.0 |
Duct seal 14mm / 8.0 > 6.5 mm | 14 | 8.0-6.5 |
Duct seal 14mm / 10.0 > 8.0 mm | 14 | 10.0-8.0 |
Duct seal 16mm / 8.0 > 6.5 mm | 16 | 8.0-6.5 |
Duct seal 16mm / 10.0 > 8.0 mm | 18 | 10.0-8.0 |
Duct seal 18mm / 12.0 > 9.4 mm | 20 | 12.0-9.4 |
Duct seal 20mm / 12.0 > 9.4 mm | 20 | 12.0-9.4 |
Product Categories : Gas Block Connector > Divisible gas block connector